No Comments »

Tested with PassMark(TM) PerformanceTest 6.1 with 15% processor overclocking.
(more…)

Filed under: Hardware by White on 26. March 2010. at 1:02

64 Comments »

This benchmark shows perfonmance decrease with AAM turned on. Noise reduction is significant (not measured).

Disk used: Western Digital Caviar 250GB.

OS: Windows Vista SP1 x64.

Software: HD Tune

AAM configuration tool: HDDScan

Filed under: Hardware by White on 21. April 2009. at 18:46

79 Comments »

By default, my Kingston mem. modules work at 667MHz on my Asus P5K motherboard. I set it to 800MHz manually from BIOS. These are my test results (method: best of 3):

Original memory clock (800MHz)

- latency – 71.7
- copy – 5751MB/s
- write – 6087 MB/s
- read  – 7081MB/s

Default clock (667MHz, on Asus P5K when set to ‘Auto’)

- latency – 77.8
- copy – 5466MB/s
- write – 6084 MB/s
- read – 6469MB/s

UPDATE (24.02.2009.):

Original memory clock (800MHz) + Timings set to 4-4-4-12, 2.0V

- latency – 69.8
- copy – 5900MB/s
- write – 6080 MB/s
- read – 7078MB/s

Notice: this article is not overclocking 667 modules to 800. My memory should work at 800MHz by default! Lavalys Everest used: Ultimate Edition 4.5.1403 Beta

Filed under: Hardware by White on 23. June 2008. at 22:36

93 Comments »

Testing game: Unreal 3 (default + 1280×960 res)

Map: Torlan Classic

Map Locations: A) Red base (standing on tower), B) River (driving manta, shooting)

CPU: Core 2 Duo E6750

Mem: 2GB Kingston HyperX 800MHz DDR2

OS: Windows Vista Ultimate SP1

(more…)

Filed under: Hardware by White on 9. May 2008. at 16:20

No Comments »

Postoji dva rešenja pomoću kojih se ovo čudo može naterati da radi kako treba. Pri tome, prvenstveno mislim na P2P programe.

1. Rešenje koje sam prvobitno koristio sastojalo se u korišćenju nečeg što se zove “PPP IP extension”, tj. da IP mog računara (jedinog koga kačim na net) bude praktično javni IP koji se vidi spolja. Kako bi ovo funkcionisalo, morao sam da koristim DHCP, tj. nisu bila potrebna nikakva podešavanja na računaru. Jedino što je trebalo da se uradi je da se pristupi modemu (standardno, 192.168.1.1 user: admin, pass:admin) i da se pronađe: Advanced Setup -> WAN. Zatim se odabere Edit dugme pored odgovarajuće konfiguracije (koja se dobije od providera). Posle dva klika na Next, pojaviće se i checkbox “PPP IP extension” koga treba čekirati. Posle dva klika na Next i jednog na Save, podešavanje je završeno. Modem kada proradi će poslati računaru javni IP koji će on koristiti.

(more…)

Filed under: Hardware by White on 10. December 2007. at 17:28